The Consul 4.45 LTB-SN is an excellent quality, electro-hydraulic 4-post lift platform, specifically designed for lifting passenger cars and commercial vehicles, as well as for carrying out wheel alignment procedures. Thanks to its outstanding load capacity and design optimized for long-wheelbase vehicles, it is the ideal choice for modern service centers.
This model features an integrated, free-rolling scissor lift, which allows for complete wheel freedom during adjustment processes, ensuring maximum accuracy.
The Consul 4.45 LTB-SN lift has several features that increase efficiency, safety, and usability in the workshop environment:
High Load Capacity: With a nominal load capacity of 4,500 kg, it is suitable for safely lifting most passenger cars and light commercial vehicles.
Integrated Free-Rolling Scissor Lift: The built-in scissor lift has a load capacity of 3,500 kg, ideal for wheel alignment tasks.
Long and Adjustable Platforms: The platforms equipped with 1000 mm long ramps are also suitable for sports cars. One platform is almost fully adjustable, equipped with a locking mechanism.
Hydraulic System: A quiet, oil-bath hydraulic drive ensures reliable and smooth lifting.
Safety Features: Multiple safety systems guarantee accident-free operation: hydraulic tensioning cylinder, protection against loose cables, rollback protection, and acoustic foot protection.
Central Control: The pneumatic locking system can be operated with central control (at 8 bar pressure).
Locking Accuracy: Locking at the full lifting height is achieved in 100 mm increments using locking rods.
Optional Column Spacing: Optionally available 3,000 mm column gap (Lichte Weite) for wider vehicles.
Accessories: Includes 40 mm elastomer lifting pads as standard accessories.
The table below summarizes the critical technical parameters of the Consul 4.45 LTB-SN lift:
| Characteristic | Value | Note |
|---|---|---|
| SKU | 559302 | |
| HAN | 421680 | |
| Category | 4-Post Lifts | |
| Rated load capacity | 4.500 kg | Total Load Capacity |
| Lifting height | ca. 2.005 mm | |
| Lifting Time (loaded) | approx. 35 seconds | |
| Set-up width | 3,250 mm | |
| Drive-up height | approx. 145 / approx. 195 mm (AM) | |
| Clearance between tracks | ca. 2.780 mm | |
| Tápellátás | 400 V / 50 Hz | |
| Drive Power | 3.0 kW | |
| Fuse Protection | 16 A slow-blow fuse | |
| Oil quantity | 9 liters | |
| Rail width | 630 mm | |
| Rail length | 5,200 mm | |
| Rail distance (adjustable) | approx. 850 – 1070 mm | |
| Overall height | ca. 2.660 mm | |
| Installation Length (with ramps) | 6,350 mm | |
| Drive-over height | approx. 50 mm (SN) | |
| Lifting capacity of the free-rolling lift | 3,500 kg | |
| Lifting height of the free-rolling lift | ca. 450 mm | |
| Length of the free-rolling lift | 1,400 – 1,900 mm | Extendable |
| Lifting time of the free-rolling lift | approx. 15 seconds | |
| Protection class | IP 54 | |
| Specifications | GS-approved, DIN EN 1493, CE-approved |
The outstanding capability of the 4.45 LTB-SN model is its support for wheel alignment work, made possible by the integrated free-rolling scissor lift.
Master/Slave Hydraulic System: The freely moving lift is equipped with a Master/Slave hydraulic system for synchronized and safe lifting.
Extendable Supports: The supports of the freely moving lift can be extended, allowing flexible adaptation to different center distances.
Full-Size Jack Plates (with Gear Rack Kit): When ordered together with the runway alignment kit, the lift rails come with integrated, full-size jack plates.
Turntable Integration: The set includes the 50 mm high turntable system, with sequential turntable covers.
For maximum precision, the following accessories can be ordered for the lift:
Consul Full Runway Alignment Kit for 4.45 LTB-SN: Complete kit for 630 mm rail width and 5,200 mm rail length.
Consul Adapters for 3D Runway Alignment Kit (e.g., Beissbarth Easy 3D): Retrofit adapters for 3D alignment systems (1 set = 2 pieces).
Consul Jack Plate Retrofit Kit: Specifically for the retrofit of lifts equipped with narrow platforms.
The design of Consul lifts prioritizes durability and user-friendly operation:
Electro-hydraulic Control: Ensures precise and reliable operation.
Operating Direction: Operation is performed from the front left lifting direction.
Main Switch: Equipped with a main switch separated according to CE requirements, which can be locked if necessary.
Platform Length: The 5,200 mm long rails offer excellent stability.
Widening of Column Distance: For the 4.45 series, an optional adapter kit is available which increases the distance between the two columns to 3,000 mm, ideal for wider track vehicles.
Important Note: The lift does not include the runway alignment kit as standard equipment, but its design allows for its later integration. Lifting and lowering ramps (with roll-back protection) can be ordered separately, especially for lifts that do not have built-in runway alignment equipment for flush mounting.
The Consul 4.45 LTB-SN is a robust, long-term investment device that complies with the strictest industry standards (DIN EN 1493, CE).
