The Consul 4-post lift 4.65 SN model is a robust and reliable solution for lifting passenger cars and commercial vehicles, especially where precise requirements for wheel alignment exist. This lift of excellent quality is the ideal choice for workshops that require high load capacity, handling long-wheelbase vehicles, and integrated lifting functions.
The Consul 4.65 SN lift has been designed with maximum safety and efficiency in mind, combining modern hydraulic technology with user-friendly operation.
Exceptional Load Capacity: Its nominal load capacity of 6,500 kg allows for the safe lifting of heavy trucks and larger passenger cars.
Integrated Wheel-Free Scissor Lift: It features a built-in 3,500 kg capacity free-moving scissor lift, ideal for wheel alignment. This unit is equipped with extendable supports for flexible positioning.
Master/Slave Hydraulics: The wheel-free scissor lift operates with a Master/Slave hydraulic system, ensuring synchronized and stable lifting.
Sports Car Compatibility: The 1,500 mm long ramps allow for the comfortable drive-on of low-profile, sporty vehicles.
Precise Positioning: One track surface is fully adjustable, optionally with a roller system mechanism, which allows for fine-tuning for wheel alignment.
Safe Operation: Multiple safety systems guarantee trouble-free operation: hydraulic cylinders, protection against loose cables, anti-roll-back protection, and acoustic foot protection.
Pneumatic Locking: A centrally controlled pneumatic locking system (requires 8 bar pressure) ensures stable vehicle fixation at the desired height in 100 mm increments.
The table below details the critical technical parameters of the Consul 4.65 SN lift:
| Characteristic | Value | Note |
|---|---|---|
| SKU | 730796 | |
| HAN | 500531 | |
| Category | 4-Post Lifts | |
| Rated load capacity | 6,500 kg | Total vehicle weight |
| Lifting Height (main lift) | ca. 1.980 mm | |
| Lifting Time (loaded) | approx. 55 seconds | |
| Set-up width | 3,505 mm | |
| Drive-up height | approx. 185 / approx. 235 mm (with AM option) | |
| Distance between track surfaces | ca. 2.945 mm | |
| Tápellátás | 400 V / 50 Hz | Three-phase mains |
| Drive Power | 3.0 kW | |
| Fuse Protection | 20 A slow-blow | |
| Oil quantity | 9 liters | |
| Track surface width | 630 mm | |
| Track surface length | 5,500 mm | |
| Distance between track surfaces (adjustable) | approx. 690 – 1,140 mm | |
| Overall height | ca. 2.610 mm | |
| Installation length with ramp | 7,120 mm | |
| Drive-over height | approx. 50 mm (SN version) | |
| Wheel-free scissor lift capacity | 3,500 kg | |
| Wheel-free scissor lift lifting height | ca. 450 mm | |
| Wheel-free scissor lift length | 1,400 – 1,900 mm | Extendable supports |
| Wheel alignment lift lifting time | approx. 15 seconds | |
| Protection class | IP 54 | |
| Specifications | GS-approved, DIN EN 1493, CE-approved |
The Consul 4.65 SN lift incorporates several design features that increase workshop flexibility and ease of handling:
Hydraulic System: A quiet, oil-bath hydraulic drive ensures smooth and reliable lifting. Electro-hydraulic control allows for simple operation.
Operating Direction: The lift is optimized for vehicles being driven onto it from the rear (operation from the rear left position).
Safety Switches: It features a CE-compliant, disconnectable main switch that can be locked if necessary.
Runway Adjustments:
The width of the runways is flexibly adjustable (approx. from 690 mm to 1,140 mm), allowing for vehicles with different track widths to be accommodated.
One runway is fully adjustable and equipped with a locking mechanism, which can optionally be fitted with roller guides for fine positioning required for wheel alignment.
An integrated rail is provided for positioning the jacking beam, further increasing flexibility for working underneath the vehicle.
The wheel alignment lift is equipped with extendable supports whose length can be adjusted between 1,400 mm and 1,900 mm.
40 mm elastomer supports (pick ups) are included as standard equipment for vehicle protection.
If the lift is ordered for wheel alignment, the following accessories are included as standard equipment, further enhancing precision:
Full-width Sliding Plates: Integrated full-width sliding plates for simulating lateral movement of the axles.
Turntable System: System suitable for accommodating turntables, which can be up to 50 mm high, with continuous turntable surface.
Detailed technical and installation documentation is available for the product:
Catalogue (Brochure): Available in downloadable PDF format.
Installation plan (Installation plan): Detailed PDF guide for professional installation.
The performance of the Consul 4.65 SN lift can be further enhanced with the following accessories, available separately:
Consul Auxiliary Lift, Sintered – SURCHARGE: Auxiliary lift in sintered design (Auxiliary lift), providing additional lifting possibilities.
Consul Complete Track Fitting Kit for 4.55 / 4.65 SN: Complete kit for 630 mm wide and 5,500 mm long runways, specifically for lifts equipped with a wheel alignment lifting platform.
Consul Adapters for 3D Track Fitting Kit (e.g., Beissbarth Easy 3D): Retrofit adapters for 3D track fitting systems, set of 2 pieces.
Consul Anti-Slip Coating for Runways – Not Retrofittable: Special coating for maximum grip.
Consul Incline and Decline Ramps with Wheel Stop (for in-ground version): Different versions available:
Ramps for lifts without a track fitting device (for in-ground version).
Ramps for lifts equipped with a track fitting device (for in-ground version).
Consul Incline and Decline Ramps with Wheel Stop, Straight, Extended: Ramps approx. 1,500 mm long, set of 2 pieces.
Consul Lifting Bridges for Frame Chassis Vehicles: With two movable adapters and turntable spindle, 3,000 kg load capacity, for the 4.45 series, suitable for double scissor, scissor, 2- and 4-piston lifts as well.
