| Dimensions | 591 × 224 × 215 cm |
|---|
This detailed description presents the technical characteristics and advantages of the Consul 0.40 S-AM BA type, 4800 mm in-ground, electro-hydraulic scissor lift, which is ideal for service and wheel alignment tasks requiring a high level of accuracy.
A Consul 0.40 S-AM BA modell egy kiváló minőségű, padlóra telepíthető ollós emelő, amelyet kifejezetten személygépjárművek emelésére és futómű-beállítására terveztek, maximális, 4.000 kg-os össztömegig. A kialakítás lehetővé teszi a járművek tökéletesen vízszintes (szintezett) magasságban történő emelését, ami elengedhetetlen a modern, 3D-s futóműállításhoz.
This lift combines reliability, safety, and efficiency in the workshop environment:
Floor-Installation Design (BA): The lift can be installed directly onto the workshop floor, requiring minimal installation depth, making it ideal for existing facilities where sunken installation is not feasible.
Electro-hydraulic Control: Ensures a fast, smooth, and reliable lifting/lowering process. The Master/Slave hydraulic system guarantees the synchronized operation of the platforms.
Wheel Alignment in Fixed Levelled Position: The lift allows for the precise horizontal fixing of the vehicle, which is a prerequisite for accurate wheel alignment and inspection.
Turntable Installation Option: The turntables equipped with series accessory covers (pick-up points) can be installed up to 50 mm high, facilitating vehicle positioning.
Állítható Teljes Méretű Csúszó lemezek: A platformokhoz integrált, teljes méretű csúszó lemezek állíthatók, amelyek rugalmasságot biztosítanak a különböző nyomtávú járművekhez.
Drive-on Ramps and Anti-Rollback Stopper: The platforms are equipped with integrated ramps for easy drive-on access, as well as anti-rollback protection for maximum safety.
Integrated Jacking Beam Rails: Integrated rails that facilitate the placement of lifting bridges required for wheel alignment tasks can be found on the platforms.
The technical parameters of the Consul 0.40 S-AM BA lift ensure long-term, heavy-duty operation:
| Characteristic | Value | Note |
|---|---|---|
| Part Number (SKU) | 732826 | |
| Manufacturer Number (HAN) | 500444 | |
| Category | Scissor Lifts | |
| Rated load capacity | 4.200 kg | |
| Maximum lifting height | ca. 2.150 mm | |
| Lifting Time (loaded) | approx. 35 seconds | |
| Installation Width (External) | ca. 2.240 mm | |
| Installation Length (External) | approx. 5,910 mm | |
| Drive-up height | ca. 310 mm | |
| Hydraulic Motor Power | 5.5 kW | |
| Tápellátás | 400 V / 50 Hz | Three-phase mains |
| Fuse Protection | 20 A slow blow | |
| Length-Rail Width | ca. 650 mm | |
| Length-Rail Length | 4.800 mm | |
| Protection class | IP 54 | Dust and splash-proof |
| Standards | GS-approved, DIN EN 1493, CE-approved |
The lift platforms are made from special rolled steel profiles, which ensure exceptional rigidity and durability.
Safety and Control Functions:
Pneumatic Release: During lowering, the retaining clamps release pneumatically, controlled by a push button.
Mechanical Locking System: A 17-position mechanical locking device ensures secure holding during lifting.
Acoustic Protection Element: Foot protection with acoustic signaling during the lowering phase.
Main Switch: Main switch that can be switched off separately, compliant with CE directives.
Bearing: Shared, 20 mm thick fixed and sliding bearing (galvanized in the series), with optional calibration possibility for wheel alignment setup.
Electrical Connection: 230 V socket built into the lift.
The Consul 0.40 S-AM BA lift can be flexibly extended for workshop-specific requirements:
3D Wheel Alignment Adapter Kit (e.g., for Beissbarth Easy 3D): Retrofit adapters for 3D wheel alignment systems.
Csúszó lemez Csúszásgátló Bevonat: Treatment of the platform surfaces with an anti-slip coating (Note: this coating cannot be retrofitted).
Drive-on Ramp with Roll-back Stopper: Standard accessory, but also available for replacement or exchange (approx. 1,000 mm long). Longer, straight ramps are also available (approx. 1,500 mm long).
Turntable Replacement Inserts (475 / 630 mm): Inserts for replacing existing turntables, enabling fine adjustment during wheel alignment.
Lighting Solutions: Optional factory-installed lighting (4 LED lamps, with 1 switch and cabling).
Control Panel Placement: Right-hand placement of the control console available for an extra charge.
Fixing Materials: Fixing kit required for the 0.35/0.40 series (with 28 M16 reaction bolts and screws).
This Consul scissor lift is the ideal choice for workshops looking for a reliable, high-capacity, and precise lift optimized for wheel alignment in a floor-mounted version.
