| Dimensions | 567 × 224 × 215 cm |
|---|
This detailed description presents the Consul 0.40 SN-AM BA 4560mm refers to a floor-mounted, electro-hydraulic scissor lift, specifically optimized for high-level vehicle servicing, particularly wheel alignment. The equipment features an integrated auxiliary lift (wheel-free lift) that can be extended in both directions, ensuring excellent stability for lifting vehicles up to a gross weight of 4,200 kg.
This lift is part of the Consul C-Line series, combining reliability, long lifespan, and advanced functions to meet the needs of modern workshops.
The Consul 0.40 SN-AM BA lift includes several design elements that significantly increase work efficiency and safety:
Integrated Auxiliary Lift (Wheel Free Lift): The built-in auxiliary lift, extendable on both sides, allows for complete wheel access, which is essential for complex wheel repair and alignment jobs. The auxiliary lift has a load capacity of 3,500 kg and an approximate lifting height of 450 mm.
Design Optimized for Wheel Alignment: The lift enables securing vehicles in a fixed, horizontal position for wheel alignment.
Turntable Fixing Option: The receiving elements for the turntable (with cassette system), which are part of the chassis equipment and can be raised by 50 mm, ensure precise positioning during the alignment process.
Premium Quality Materials: The platforms are made from special rolled steel profiles, guaranteeing high rigidity and a long service life.
Safe Operation: In addition to electro-hydraulic control, pneumatic locking (push-button release during lowering), acoustic foot protection, and a mechanical locking system (17 steps) ensure maximum operational safety.
Flexible Installation: Primarily a floor-mounted design, but a sunken (recessed) version is optionally available, complete with 2 folding ramps.
The following table summarizes the critical technical parameters of the Consul 0.40 SN-AM BA 4560mm lift:
| Parameter | Value | Note |
|---|---|---|
| Item Number (SKU) | 732545 | |
| Manufacturer Number (HAN) | 500440 | |
| Category | Scissor Lifts | |
| Rated Capacity (Main Lift) | 4.200 kg | |
| Lifting Height (Main Lift) | ca. 2.150 mm | |
| Lifting Time (loaded) | approx. 35 seconds | |
| Set-up width | ca. 2.240 mm | |
| Installation length | ca. 5.670 mm | |
| Drive-up height | ca. 290 mm | |
| Power supply | 400 V / 50 Hz | Three-phase |
| Drive Power | 5.5 kW | |
| Fuse Protection | 20 A slow blow | |
| Runway width | ca. 650 mm | |
| Runway length | ca. 4,560 mm | |
| Clearance Height (SN) | ca. 50 mm | In the integrated position of the auxiliary lift |
| Auxiliary Lift Capacity | 3,500 kg | |
| Auxiliary Lift Lifting Height | ca. 450 mm | |
| Auxiliary lift length | approx. 1,440 – 1,940 mm | Extended Range |
| Auxiliary lift raising time | 15 seconds | |
| Auxiliary lift width | ca. 670 mm |
The Consul 0.40 SN-AM BA lift includes the following special functions and design elements:
Platforms: Made from special rolled steel profiles, ensuring exceptional stability.
Csúszó lemezek: Állítható, teljes méretű csúszó lemezek találhatók a futópályákon, amelyek precíz oldalirányú mozgást tesznek lehetővé.
Drive-on Ramps: The platforms are equipped with approach ramps and anti-roll back protection.
Bearing: Split, 20 mm thick fixed and sliding bearing system (serially galvanized), which can optionally be calibrated for wheel alignment.
Jacking Beam Mounting: Integrált sín a hidraulikus emelőbakok számára.
Hydraulic System: Master/Slave hydraulic system ensures synchronized lifting.
Control: Fully electro-hydraulic control.
Pneumatic Locking: During lowering, a push-button activated pneumatic release assists in quick and safe descent.
Safety Switch: Mains switch conforming to CE requirements, independently lockable.
Extendability: Extendable on both sides, adapting also to wider vehicles.
Adapters: The standard equipment includes the Elastomer adapters (40 mm), which are necessary for supporting the vehicles.
For Wheel Alignment Bay: Specifically suitable for securing vehicles in a fixed, horizontal position in the wheel alignment bay.
Turntable Reception: The standard equipment includes the turntable cover, which enables compatibility with 3D wheel alignment systems.
Protection: IP 54 protection class.
Electrical Connection: 230 V socket built-in.
Certifications: GS approved, DIN EN 1493 and CE approved.
Further options are available in connection with the product, which can further enhance the functionality of the equipment (although these must be ordered separately):
Galvanized Auxiliary Lift: Available for an extra charge in a corrosion-resistant, galvanized version.
3D Wheel Aligner Adapters: Special adapter kits (e.g., for Beissbarth Easy 3D) for retrofitting.
Anti-slip Coating: Anti-slip coating available for platforms (not retrofittable).
Various Ramps: Straight, extendable drive-on ramps of various lengths (e.g., 1,000 mm or 1,500 mm).
Chassis Lift Bridge: Lifting bridge usable for chassis frame vehicles (with 3,000 kg capacity).
Control Panel Placement: Optional placement on the right side (at extra charge).
Fixing Materials: Mounting kits for the 0.35/0.40 series (with M16 anchor bolts).
A Consul 0.40 SN-AM BA 4560mm A robust, professional solution that guarantees high-precision service work and long-term, reliable operation in any modern vehicle repair shop.
