The Consul 4-post lift 4.55 OEM model is a top-class, professional vehicle lift designed to meet the highest workshop demands. It is ideally suited for lifting large vehicles, providing optimal access and an excellent working environment for service operations. Equipped with the „easy slide” system, the 500 mm wide runways guarantee easy setup and perfect access to the vehicle's undercarriage.
Ez az OEM változat ideális választás azoknak a műhelyeknek, amelyek megbízható, tartós és funkciókban gazdag emelőt keresnek, amely megfelel a legszigorúbb biztonsági és minőségi szabványoknak.
The Consul 4.55 OEM lift offers several design solutions that significantly increase efficiency and user comfort:
Easy Slide System: The runways can be easily adjusted by a single person, allowing for quick and simple positioning for various vehicle setups.
Optimal Access: The 500 mm wide runways and the optionally extendable footplates ensure unrestricted access to the vehicle, making work easier.
Sports Car Compatibility: Features 1,500 mm long approach ramps, making it ideal for lifting low-profile, sporty vehicles as well.
Integrated Tool Holder Rails: A futópályákba integrált sínrendszer lehetővé teszi emelőbakok egyszerű és biztonságos elhelyezését.
Pneumatic Locking: A centrally controlled pneumatic locking system (operating at 8 bar pressure) ensures quick and safe positioning.
Precise Fixation: Locking rods placed in 100 mm increments across the entire lifting height guarantee precise and stable support.
Integrált Keréknélküli Emelő: It is equipped with a built-in, extendable support wheel-free scissor lift that operates with a Master/Slave hydraulic system. This allows for the free lifting of the wheels off the runways.
Comfortable Working Environment: Various air and 230 V connection points are available in the work area for pneumatic tools and other equipment.
Accessories: 40 mm elastomer adapters are included in the set.
Turntable Compatibility: Compatible with systems for 50 mm high turntables, with sequential turntable covering.
The precise technical parameters of the Consul 4.55 OEM lift ensure reliable and long-term operation:
| Characteristic | Value | Note |
|---|---|---|
| SKU | 576850 | |
| HAN | 473159 | |
| Category | 4-Post Lifts | |
| Rated load capacity | 5,500 kg | |
| Lifting height | ca. 1.980 mm | |
| Lifting Time (loaded) | approx. 55 seconds | |
| Set-up width | 3,505 mm | |
| Drive-up height | ca. 242 mm | |
| Distance between runways | ca. 2.945 mm | |
| Power supply | 400 V / 50 Hz | Three-phase |
| Drive Power | 3.0 kW | |
| Fuse Protection | 20 A slow blow | |
| Oil quantity | 9 liters | |
| Runway width | 500 mm | |
| Runway length | 5,500 mm | |
| Runway distance (adjustable) | approx. 750 – 1,200 mm | |
| Overall height | ca. 2.634 mm | |
| Total length with ramps | 7,120 mm | |
| Drive-over height | approx. 50 mm (in case of SN version) | |
| Wheel-free lift load capacity | 3,500 kg | |
| Wheel-free lift lifting height | ca. 450 mm | |
| Wheel-free lift length | 1,400 – 1,900 mm | |
| Wheel-free lift lifting time | approx. 15 seconds |
The Consul lift complies with the strictest European standards, guaranteeing maximum safety during workshop operations:
Protection Class: IP54
Approvals: GS approval, DIN EN 1493, CE approval.
The Consul 4.55 OEM lift can be flexibly expanded with numerous accessories that further increase the versatility of servicing:
This accessory lift is available in a galvanized version for an extra charge, which provides enhanced corrosion protection.
Adapters for 3D wheel alignment kit, specifically for 4-post lifts. Suitable for retrofitting. The set contains 2 adapters.
Special anti-slip coating for the runways. Important note: This coating cannot be retrofitted onto already installed lifts.
Two-piece set containing the incline and decline ramps, as well as the anti-roll stop mechanism. Recommended for lifts with flush installation and wheel alignment equipment.
Two-piece set containing the incline and decline ramps, as well as the anti-roll stop mechanism. Suitable for lifts with flush installation without wheel alignment equipment.
It features two movable adapters and a turntable thread, up to 3,000 kg load capacity. Suitable for the 4.45 series, double scissor, scissor, as well as 2 and 4-piston recessed lifts in runway version. The lift type must be specified when ordering.
The platform-mounted support ensures the precise positioning of the headlight adjustment system. It eliminates the need for cables on the floor, which pose a tripping hazard.
Anchoring set for types 4.55, 4.55 SN, 4.70, 4.70 SN, 4.120. Contents: 16 pcs M16 anchor bolts and screws.
The Consul 4-post lift model 4.55 OEM offers a perfect combination of reliability, high load capacity, and advanced functions for modern automotive workshops.
