| Dimensions | 553 × 226 × 185 cm |
|---|
This detailed description presents the Consul 0.42 SN-AM BE – 4540mm presents the technical specifications and advantages of the type of scissors lift, which offers an ideal solution for professional workshop environments, especially for wheel alignment and general lifting tasks. This model is part of the Consul C-Line series, and thanks to its in-ground (BE) design, it ensures minimal space requirement in the work area.
A Consul 0.42 SN-AM BE egy elektrohidraulikus, padlóba építhető csillagollós emelő, amelyet nagy teherbírású és precíz munkavégzésre terveztek. A beépített kiegészítő emelő (kerékszabadító emelő) mindkét irányban kihúzható, 3.500 kg teherbírással, ami kiváló rugalmasságot biztosít a különböző járműjavítási feladatokhoz. A futópályák teljes méretű, csúszó lemezes kialakítása, valamint a kazettás rendszerrel ellátott felállás a precíz futóműállításhoz optimalizált.
This lift is manufactured in compliance with the highest safety and quality standards (DIN EN 1493, CE approval), guaranteeing a long service life and reliable operation.
In-ground model (BE): The fully submersible design ensures maximum space utilization and an obstacle-free work area when the lift is not in use.
Integrated Auxiliary Lift (Wheel Free Lift): Extendable auxiliary lift on both sides with a load capacity of 3,500 kg, which allows for the free lifting of wheels from the level of the runways.
Optimized for Wheel Alignment: Enables the fixed, leveled locking of the runways for wheel alignment.
Cassette System: The pick-up for the alignment rack occurs up to a height of 50 mm, with a serial turntable cover, which is ideal for precise adjustments.
Teljes Méretű Csúszó lemezek: Állítható, teljes méretű csúszó lemezek biztosítják a különböző nyomtávú járművek optimális alátámasztását.
Robust Design: The platforms are made of special rolled steel profiles, guaranteeing high rigidity and durability.
The Consul 0.42 SN-AM BE lift features electro-hydraulic control with a Master/Slave hydraulic system for synchronized operation. Safety is a top priority, guaranteed by several functions:
Pneumatic Release: Pneumatic release on button press during lowering.
Mechanical Locking: A 17-step mechanical locking system ensures secure holding at the working height.
Acoustic Foot Protection: Warning buzzer during the lowering phase.
Detachable Main Switch: Lockable main switch complying with CE regulations.
Bearing: Shared, 20 mm thick fixed and sliding bearing (serially hot-dip galvanized), with optional calibration for wheel alignment.
Drive-over Design: A platformok áthajtó peremekkel rendelkeznek.
Integrated Holder: Beépített sín a hidraulikus emelőbak számára.
Protection Class: IP 54 protection, 230 V socket on the equipment frame.
The table below summarizes the critical technical parameters of the Consul 0.42 SN-AM BE lift:
| Characteristic | Value | Note |
|---|---|---|
| Item Number (SKU) | 732537 | |
| Manufacturer Number (HAN) | 500441 | |
| Category | Scissor Lifts | |
| Rated load capacity | 4.200 kg | Main Lift |
| Lifting height (max.) | ca. 1.850 mm | |
| Lifting Time (loaded) | approx. 35 seconds | |
| Set-up width | ca. 2.240 mm | |
| Installation length | ca. 5.530 mm | |
| Power supply | 400 V / 50 Hz | Three-phase |
| Drive Power | 5.5 kW | |
| Fuse Protection | 20 A slow-blow | |
| Runway width | ca. 650 mm | |
| Runway length | ca. 4.560 mm | |
| Drive-over height | approx. 50 mm (SN) | |
| Auxiliary lift capacity | 3,500 kg | |
| Auxiliary Lift Lifting Height | ca. 450 mm | |
| Auxiliary lift length (extended) | approx. 1,440 – 1,940 mm | Double-sided extendability |
| Auxiliary lift raising time | 15 seconds | |
| Auxiliary lift width | ca. 670 mm |
The Consul 0.42 SN-AM BE lift can be extended with several optional accessories that further increase workshop efficiency and machine versatility:
Hot-dip Galvanized Auxiliary Lift (Surcharge): Recommended to increase durability, especially in corrosive environments.
3D Wheel Aligner Adapters: Special adapter kits (e.g., for Beissbarth Easy 3D) for subsequent installation, enabling the integration of the most modern 3D wheel alignment systems.
Anti-slip Coating: Anti-slip coating applicable to the platform surface (not retrofittable).
Chassis Lift Bridge: Various lift bridge options with movable adapters and turntable spindle (up to 3,000 kg), specifically for chassis vehicles.
Control Panel Placement: Optional placement on the right side (at extra charge).
Fixing Materials: Fixing kits for the 0.35/0.40 series (with M16 reaction bolts).
Integrated Illumination: Optional factory-installed LED lighting (4x LED 45° lamps, with switch and cabling).
This Consul scissor lift offers a perfect combination of reliability, high load capacity, and the precise functions required for wheel alignment, ideal for modern service environments.
