The Consul 4-post 4.45 XLT lift is designed for modern workshops, making it an ideal solution for lifting and wheel alignment of vehicles up to 4,500 kg. Thanks to its especially wide and long platforms, it is perfectly suited for servicing larger vehicles, including dual-wheel models, ensuring maximum flexibility and safety.
This equipment combines reliability, precise hydraulic operation, and a user-friendly design to meet the highest workshop requirements.
The Consul 4.45 XLT lift incorporates several design elements that optimize workflow and enhance safety:
Low Noise Hydraulics: The oil-immersed hydraulic drive operates extremely quietly and smoothly, contributing to a more pleasant working environment.
Electro-hydraulic Control: Control of precise and reliable lifting and lowering functions.
Operating Direction: The control panel is located in the front left corner relative to the vehicle's alignment direction, optimizing operational access.
Main Safety Switch: Main switch isolated in accordance with CE requirements, which can be locked if necessary to prevent unauthorized use.
Acoustic Foot Protection: An audible warning signal ensures a safe lifting and lowering process.
Advanced Safety Systems: Hydraulic draw cylinder, protection against loose cables, cable failure protection, and anti-rollback protection guarantee maximum safety.
Sports Car Compatibility: The platforms are equipped with 1000 mm long drive-on ramps, ideal for driving on low-profile, sporty vehicles.
Adjustable Platform: One platform is fully adjustable, equipped with a locking mechanism for precise positioning.
Integrated Jacking Beam Rails: The rail system integrated into the platform allows for the simple and fast installation of jacking beams.
Pneumatic Locking: Central control for the pneumatic locking system (8 bar operating pressure).
Fine Adjustment Clamping: Locking rods with a 100 mm step at every full lifting height ensure precise positioning.
Optional Column Spacing: It is possible to extend the distance between the columns to 3,000 mm (with an optional accessory).
Specification: GS approved, DIN EN 1493 and CE approved, IP 54 protection class.
If the lift is ordered together with the wheel alignment kit, the following special functions also become available:
Integrated Full-Size Sliding Plates: They enable the fine adjustments necessary for wheel alignment.
Turntable System: An integrated system for the turntable plates (up to 50 mm height) ensures precise maneuvering during alignment.
The detailed technical parameters of the Consul 4.45 XLT lift are as follows:
| Characteristic | Value | Note |
|---|---|---|
| Part Number (SKU) | 537480 | |
| Manufacturer Number (HAN) | 421677 | |
| Category | 4-Post Lifts | |
| Rated load capacity | 4.500 kg | |
| Lifting height | ca. 2.005 mm | |
| Lifting Time (loaded) | approx. 35 seconds | |
| Set-up width | 3,250 mm | |
| Drive-up height | approx. 145 mm / approx. 195 mm (with AM option) | |
| Distance between the runways | ca. 2.780 mm | |
| Power supply | 400 V / 50 Hz | |
| Drive Power | 3.0 kW | |
| Fuse Protection | 16 A slow-blow fuse | |
| Oil quantity | approx. 9 liters | |
| Runway width | 500 mm | |
| Runway length | 5,500 mm | |
| Distance between runways (center to center) | kb. 980 – 1.190 mm | Adjustable range |
| Overall height | ca. 2.660 mm | |
| Installation length with approach ramps | ca. 6.660 mm |
Detailed information about the product is available in the following documents:
4.45 Brochure: Detailed product information on the C-Line 4-post lifts.
Installation plan: Precise guide for the professional installation of the lift.
The 4.45 XLT lift can be flexibly expanded to suit workshop requirements:
This complete kit is designed specifically for lifts without a wheel-free lifting facility. With a platform width of 500 mm and a platform length of 5,500 mm, it is ideal for 3D wheel alignment setups.
Retrofit adapters that allow the use of 3D wheel alignment systems (such as Beissbarth Easy 3D) on 4-post lifts. One set contains 2 pieces.
Accessory sliding plates for retrofit installation, intended for lifts with narrow platforms.
Special conversion kit for widening the distance between the posts of the 4.45 series to a clear width of 3,000 mm, to accommodate larger vehicles.
Special anti-slip coating for the ramps, available as a factory option, which cannot be retrofitted.
Set (2 pcs) of ramps/folding plates with anti-roll-back protection, for flush installation, if the lift is not equipped with a wheel-free lifting facility.
Set (2 pcs) of ramps/folding plates with anti-roll-back protection, for flush installation, if the lift is equipped with a wheel-free lifting facility.
Ramp (2 pcs), approx. 1,000 mm long, equipped with anti-rollback protection.
The Consul 4.45 XLT lift is the ideal choice for any service where high load capacity, precise running gear adjustment capability, and long-term reliability are essential requirements.
