| Weight | 0,023 kg |
|---|---|
| Dimensions | 15 × 9 × 1,2 cm |
Product Identifier: 848068
This high-quality, plastic protector is specifically designed to facilitate the windshield removal process and protect the interior of the vehicle from damage. The 90° angled design ensures optimal coverage and protection for critical areas of the dashboard and cabin during the work.
As part of the Wielander + Schill product line, this protector serves as an accessory for professional windshield installation and removal technologies (e.g., the Roll Out 2000 system), ensuring precise and damage-free work execution.
During windshield removal, tools or sharp edges of the cut glass often risk damaging the dashboard, A-pillar trim, or headliner. This 90° bent protective shield acts as an effective physical barrier against potential injuries.
Main Features:
Special Geometry: The 90° angle ideally fits the joint point between the windshield frame and the dashboard, offering maximum protection at corners and edges.
Durable Material Use: Its plastic (kunststoff) construction resists mechanical stress while remaining flexible for a precise fit.
Könnyű Kezelhetőség: Its extremely low weight (only 0.023 kg) facilitates positioning and handling even in tight work areas.
Professional Application: The ideal accessory for windshield removal systems, ensuring the integrity of the bodywork and interior.
The table below details the product's exact dimensions and material characteristics:
| Property | Value | Note |
|---|---|---|
| Product Identifier (Part Number) | 848068 | Unique identifier for kit tracking. |
| Construction | 90° angled | Special corner protection. |
| Length × Width × Height | 150 × 90 × 10 mm | Precise physical dimensions. |
| Material | Plastic (Kunststoff) | Durable and lightweight polymer. |
| Weight | 0.023 kg | Minimal weight for easy handling. |
| Field of application | Front Windshield Removal | Interior protection. |
The use of high-quality interior protectors is not only about preserving the aesthetic condition of the vehicle but also about the efficiency of the workflow:
Cost savings: Prevents the need for costly dashboard or upholstery replacement or repair, which can save significant costs for the repair shop.
Professionalism: Careful protection increases customer satisfaction and the professional standard of the workshop.
Compatibility: Optimized specifically for windshield removal technologies, ensuring smooth tool operation across the protected surface.
This 90° guard element is often part of comprehensive protection solutions. For full protection, we recommend viewing the following similar products that cover other areas during windshield replacement:
Interior Protection Element | For Roll Out 2000 (Item No.: 848089): Protection shield optimized specifically for the Roll Out 2000 windshield removal system.
Interior Protection Element | For Dashboard | 120 mm (Item No.: 848034): A flatter protection for the direct surface of the dashboard.
Interior Protection Element Set | 2 Pieces (Item No.: 848069): A comprehensive package that also includes the 848068 (90°) and 848067 (20°) elements, ensuring versatile protection.
Contents: 1 pc 848067 (20° angle, 300 × 80 × 1.5 mm) and 1 pc 848068 (90° angle, 150 × 90 × 10 mm).
Interior Protection Element | 20° Angle | 300 × 80 × 1.5 mm (Item No.: 848067): A longer, flatter element ideal for wider surfaces.
Interior Protection Element | Round | Ø 120 mm (Item No.: 848036): A round protection element that provides assistance on certain curved surfaces.
Interior Protection Element | A-pillar and Roof Liner (Item No.: 848035): Specifically designed to protect the A-pillar cladding and the roof liner during windshield removal.
This 90° interior protection element (848068) is an essential tool for any professional performing windshield replacement to the highest standard while maximizing protection of the vehicle's interior space.
