Ez a kiváló minőségű, professzionális árammérő bilincs nélkülözhetetlen eszköz minden modern műhely számára, amely precíz méréseket igényel mind az egyenáramú (DC), mind a váltakozó áramú (AC) rendszerekben, akár 1000 A maximális áramerősségig. Kifejezetten úgy tervezték, hogy a legigényesebb autóipari, elektromos és ipari alkalmazásokban is megbízható és pontos eredményeket szolgáltasson.
The device is ideally suited for non-invasive measurement of high current loads, thereby minimizing disturbance to the circuits under test. Its robust design and wide measurement range make this clamp meter ideal for diagnosing power electronics, battery systems, electric drives, and high-power consumers.
This current clamp meter combines the latest technology with a user-friendly design, ensuring fast and efficient work:
Wide Range of Applications: Capable of measuring both direct current (DC) and alternating current (AC), making it universally usable for testing most electrical systems.
High Measurement Capacity: Suitable for measuring currents up to 1000 A maximum, making it ideal for checking the current draw of high-power systems, such as electric vehicle batteries or heavy-duty motors.
Non-Invasive Measurement: Thanks to the clamp design, measurement is performed without interrupting the conductor, which increases safety and reduces measurement time.
High Accuracy: Ensures outstanding accuracy across the entire measurement range, which is essential for troubleshooting and performance optimization.
Robust and Durable Design: Built to withstand workshop conditions, guaranteeing a long service life and reliable operation.
Simple Connection: Compatible with standard measuring instruments (likely multimeters or oscilloscopes) using optional adapters.
The basis for precise diagnostics is a reliable technical specification. The table below details the most important parameters of the device:
| Parameter | Value | Note |
|---|---|---|
| Measured Current Type | DC and AC | Direct Current and Alternating Current |
| Maximum Current (AC/DC) | 1000 A | Upper limit of the measurement range |
| Measuring Resolution | Depending on the specification | Exact value found in the instrument's manual |
| Pontosság | High (typically ± 1% + 1 digit) | The exact accuracy class is to be understood according to the attached documentation |
| Output Signal | Current-to-Voltage Conversion | Outputs a voltage signal proportional to the measured current |
| Display | Via an external measuring instrument | The clamp's output signal is processed by an external device (e.g., a multimeter) |
| Cable length | Standard length (e.g., 1.5 m) | The exact length is part of the product packaging |
| Connector | BNC or banana plug (depending on the receiving instrument) | Type of the output connector |
| Operating Temperature | Wide Range | Suitable for use in a workshop environment |
| Safety Standards | Complies with relevant IEC/EN standards | For safe operation |
This current clamp meter is an ideal choice for measurements performed in the following areas:
Monitoring of charging and discharging currents of high-voltage batteries.
Checking the current consumption of inverters and motor controllers.
Performance testing of hybrid systems.
Hűtőrendszerek áramfelvételének diagnosztikája.
Measuring the current draw of starter motors.
Load testing of generators and charging systems.
Checking the current of high consumers (e.g., heating units, fans).
Testing high-power relays and switches.
Load testing of motors on production lines.
Measurement of current draw in general electrical networks.
The operating principle of the clamp is based on measuring the magnetic field generated by the current (Hall effect or transformer principle, depending on the exact type). This method guarantees that the measurement does not affect the operation of the circuit under test, which is particularly critical for sensitive electronic systems.
The 1000 A capacity makes it possible to perform the most intensive load tests without the measuring device becoming overloaded or providing inaccurate data. The output voltage signal is proportional to the measured current, so the user can adjust the scaling according to the settings of their own multimeter or oscilloscope, thus maximizing reading accuracy.
This product is part of a wide portfolio of automotive diagnostic tools, which includes cooling system testers, air conditioning service equipment, fuel system testers, brake system testers, and several other special tools. The high-quality current clamp can be perfectly integrated into other diagnostic processes, ensuring comprehensive and professional servicing.
Important note: The exact calibration and operating instructions, as well as the list of compatible measuring instruments, can be found in the official documentation enclosed with the product. To achieve maximum accuracy, regular checking of the instrument according to the manufacturer's recommendations is advised.
