A Consul 2-oszlopos emelő 2.30 EL modellje a Consul C-Line sorozatának kiemelkedő darabja, amelyet kifejezetten a modern műhelyek igényeire szabtak. Ez az alapkeret nélküli kialakítású emelő maximális rugalmasságot és biztonságot nyújt a járművek szervizeléséhez, különösen korlátozott helyigényű vagy tiszta padlófelületet igénylő környezetben.
This product is a combination of reliability, precise execution, and user-friendly functions, guaranteeing efficient and safe work performance.
The Consul 2.30 EL lift incorporates several design elements that significantly improve usability and durability:
Electronically Synchronized Posts: The posts are made from special cold-rolled profiles, ensuring high rigidity and long service life. Electronic synchronization guarantees the perfect simultaneous movement of both posts.
Optimized Column Tilt: The 30° tilt of the posts significantly improves the door opening angle, thus facilitating the loading and unloading of vehicles, as well as access to the work area.
Bilateral Movability of Short Arms: The short support arms can be moved from both sides, providing extremely high flexibility in positioning different vehicles.
Kiváló Minőségű Csúszó elemek: The load nut is made of bronze alloy, while the safety nut is made of cast alloy, which minimizes friction and increases reliability.
Maintenance-Free Design: A kocsiszerkezet négy karbantartásmentes görgőscsapággyal van felszerelve, ami csökkenti az üzemeltetési költségeket.
Safety Features:
Törött Anya Emelési Zárás: A key safety feature that prevents unintended sinking even in case of failure.
Acoustic Foot Protection: An audible warning signal ensures safe operation during lifting and lowering.
Zárható Kezelőegység: Enables precise and safe control.
Automatic Arm Locking with Manual Release: The support arms lock automatically but can be manually released if necessary.
Convenience Features:
The cover of the inner part of the post provides an aesthetic appearance.
Padded door impact buffer and adjustable pickup plate (approx. 25 mm) for vehicle protection.
Certifications: It features protection class IP 54, GS certification, DIN EN 1493, and CE approval, complying with the strictest European standards.
Important Note: Reaching the maximum lifting heights may require the use of optional accessories. The lowest setting heights can be achieved with optimal floor conditions.
The precise specifications of the Consul 2.30 EL lift ensure that it fits exactly to the requirements of your workshop.
| Parameter | Value | Note |
|---|---|---|
| Item Number (SKU) | 654244 | |
| Manufacturer Code (HAN) | 475434 | |
| Category | 2-Post Lifts | |
| Nominal Load Capacity | 3.000 kg (3.0 tons) | |
| Lifting Height | ca. 2.005 mm | |
| Lifting/Lowering Time | approx. 50 seconds | |
| Lower Clear Height | approx. 85 mm | ( May vary depending on floor conditions ) |
| Short Arm Extension Range | approx. 430 – 830 mm | 3-piece design |
| Long Arm Extension Range | approx. 830 – 1,330 mm | 2-piece design |
| Installation Width | approx. 3,315 mm | |
| Installation Height | ca. 2.550 mm | |
| Width Between Arms | ca. 2.650 mm | |
| Clearance Width | approx. 2,320 mm | |
| Tápellátás | 400 V / 50 Hz | Three-phase mains |
| Drive Power | 2 x 2.5 kW | Total 5.0 kW |
| Safety Protection | 20 A slow blow |
To increase the performance and versatility of the Consul 2.30 EL lift, several accessories are available:
This set of 4 pieces enables easier driving onto the lift, especially for models with low ground clearance.
Set of 4 pieces, with turning plates of Ø 100 mm diameter (instead of the standard Ø 130 mm), ideal for precise positioning and free wheel movement.
Complete set required for securing the 3.500 kg capacity Consul 2-post lifts. Contents: 12 pcs M12 anchor bolts, threaded rods, and washers. (Note: For 2.30 EL, ordering 2 sets is recommended.)
Various sizes of spacers are available for Consul lift arms with capacities up to 4 tons (1 set = 4 pcs):
100 mm Spacers
12 mm Spacers
35 mm Spacers
50 mm Spacers
150 mm Spacers
200 mm Spacers
Holders for storing the spacers (1 set = 4 pcs).
Set of 2 pieces that reinforces the base plates on every 4,000 kg capacity Consul 2-post lift. Concrete thickness requirement: 150 – 210 mm. (Note: For vehicle lifts, 2 sets need to be ordered.)
The Consul 2.30 EL lift is the ideal choice for professionals looking for a reliable, safe, and space-saving lifting system to perform daily workshop tasks.
