This detailed description introduces the wall-mounted pump kit offered by Gartec, specifically optimized for 1000-liter commercial IBC (Intermediate Bulk Container) tanks. The kit is designed for the efficient and reliable dispensing of high-viscosity fluids, especially new oils, thanks to its 8:1 compression ratio.
The wall pump kit with part number NK1023/IBC is a complete, pneumatically operated solution ideal for industrial environments, workshops, and maintenance facilities where large quantities of lubricants need to be dispensed precisely and quickly from IBC containers. The kit includes the high-efficiency 8:1 ratio wall pump, the corresponding mounting bracket, the necessary hoses, and the immersion suction unit for the container.
The pump's design ensures durable operation and minimal maintenance requirements. The built-in pressure regulator guarantees that the pump operates at optimal performance, regardless of the inlet air pressure, while protecting the system from overpressure.
High Flow Rate: Up to 22 liters/minute capacity ensures fast filling and dispensing.
High Pressure Ratio (8:1): Ideal for pumping viscous fluids such as oils, as it significantly amplifies the input air pressure to the output fluid pressure.
Complete Solution: The kit includes the pump, mounting hardware, and suction unit, making it immediately installable and operational.
IBC Compatibility: Specifically fits the ring nut connector for standard 1000-liter IBC containers.
Integrated Pressure Regulator: The pressure regulator mountable on the pump ensures stable operation and a safe pressure level.
This pump kit is primarily optimized for the transfer of the following fluids:
Although the specifications refer to new oil, based on the Gartec product range, it may also be suitable for transferring fluids with similar viscosity and properties, such as:
Grease
Water
Antifreeze (Antifreeze)
Hydrocarbons
Cleaners
The precise performance and physical characteristics of the product are summarized in the following table:
| Parameter | Value | Unit of Measure | Note |
|---|---|---|---|
| Part number | NK1023/IBC | – | Identifier |
| Flow rate | 22 | l/min | Maximum performance |
| Working pressure | 4 / 58 – 8 / 116 | bar / PSI | Inlet air pressure range |
| Compression ratio | 8:1 | – | Air/Fluid pressure ratio |
| Air Inlet Connection | 3/8″ | inch (thumbs) | Pneumatic inlet |
| Noise Level (Noisiness) | 79 | dB | Noise level during operation |
| Air Consumption (Air consumed) | 580 | l/min | Air requirement at maximum load |
| Suction Size (Fishing size) | $emptyset 52 times 250$ | mm | Diameter x Length (assumed dimensions based on 52/290) |
| Weight | 38 | kg | Net weight of the set |
| Packaging Dimensions (Packaging) | $150 times 150 times 820$ and $300 times 140 times 1230$ | mm | Dimensions of the two packages (presumably the pump and accessories separately) |
Pneumatic Operation:
The pump operates pneumatically, making it excellently suited for use in explosive environments where the use of electrical equipment is prohibited. The 8:1 ratio means that with 8 bar of air pressure, a pressure of 64 bar (8 x 8) can be achieved on the outlet side, which is sufficient for the efficient transfer of most viscous lubricants.
Suction unit:
The dimensions of the suction unit (suction pipe) (Diameter 52 mm) ensure stable insertion into the bottom outlet of standard IBC containers. The length of 290 mm (assumed value based on the 52/290 marking) is sufficient to reach the bottom of most 1000-liter containers.
Noise level:
The noise level of 79 dB complies with industrial standards, but it is recommended to adhere to appropriate hearing protection measures during prolonged operation.
The kit's wall-mountable design allows for space-saving and secure mounting near the workstation. The mounting bracket provides a stable base for the pump, minimizing vibration and wear.
Ideal Application Areas:
Vehicle Repair Shops: Dispensing large quantities of motor oil, gear oil.
Industrial Maintenance: Filling machines with lubricant directly from IBC containers.
Fleet Management Centers: Fast and efficient fluid change systems.
For maximum efficiency and safety, Gartec recommends using the following accessories:
Containment Spill Pallet for 1000L IBC: A containment pallet suitable for holding a 1000 liter IBC tank, which is essential for environmental protection to prevent leaks.
Further Pump Ratios: If handling fluids with different viscosities or pressure requirements is necessary, 3:1 and 5:1 ratio wall-mounted pump kits are also available in the Gartec range (under different article numbers).
This 8:1 ratio wall-mounted pump kit represents Gartec's reliable technology, guaranteeing efficient and safe dispensing of new oils for industrial users.
