Ez a precíziós mérőeszköz a gokartok futómű-beállításának elengedhetetlen kelléke, kifejezetten a kerékdöntés rendkívül pontos mérésére lett tervezve. A Billet Gombás Döntésmérő a legmagasabb szintű pontosságot és megbízhatóságot nyújtja a versenypályán és a műhelyben egyaránt, biztosítva, hogy a futómű geometriája mindig optimális legyen a maximális teljesítmény és a kiszámítható viselkedés érdekében.
Ez a mérőműszer a hagyományos döntésmérőkkel ellentétben kizárólag a függőleges tengely körüli dőlésszög mérésére fókuszál, így egyszerűsítve a kezelést és maximalizálva a leolvasás pontosságát ezen a kritikus paraméteren.
The Billet Bubble Camber Gauge is the perfect fusion of engineering precision and user-friendly design:
Exclusive Tilt Measurement: The device is specifically optimized for measuring wheel tilt, excluding the influence of other adjustment parameters (such as toe or caster) on the reading. This guarantees clean and unambiguous tilt readings.
Excellent Quality Construction: The „Billet” designation refers to the CNC-machined, solid aluminum (or other high-strength alloy) housing, which provides exceptional durability and stability even under the harshest conditions.
High Precision Spirit Level: The integrated bubble level (spirit level) is extremely sensitive, allowing the tilt measurement to be taken in decimal or even hundredths of a degree (the precise scale is found in the specifications).
Quick and Easy Operation: The measuring head can be quickly and securely attached to the wheel hub or rim edge, minimizing setup time.
Ideal for Go-Karts: Developed specifically for the tight tolerances and special tire geometry requirements of go-karts.
Accurate data is essential for precise adjustments. The table below summarizes the most important technical parameters of the Billet Bubble Camber Gauge:
| Parameter | Value | Note |
|---|---|---|
| Measured Parameter | Camber | For Tilt Angle Measurement Only |
| Construction | CNC Machined Billet Part | Maximum Rigidity and Durability |
| Measurement Range | Specified Range (Depends on the exact scale) | Generally +/- 5 degrees or more |
| Resolution/Accuracy | Extremely high (e.g., 0.1 degrees or better) | Depends on the quality of the spirit level |
| Fixation | Universal or Wheel-Specific Adapters | Secure fit for go-kart wheels |
| Material | Solid Aluminum Alloy | Lightweight yet extremely robust |
| Surface Treatment | Anodized (typically) | Corrosion protection and aesthetics |
| Compatibility | Go-Kart Suspensions | Specially Optimized |
A kerékdöntés az egyik legkritikusabb beállítás a gokartok teljesítményének optimalizálásában. A helytelen dőlésszög jelentősen befolyásolhatja a kanyarodási képességet, a gumikopást és a kormányérzetet.
Cornering Grip: Negative camber (the top of the wheel leans inward) during cornering helps ensure that the entire surface of the tire contacts the asphalt when the vehicle receives lateral load. The Billet Bubble Inclinometer can be used to check if the set camber is appropriate for the characteristics of the given track.
Tire Life: Excessive or incorrect camber causes uneven wear, which quickly destroys expensive tires and degrades consistent performance.
Steering Feel: Setting the precise camber is essential for direct and accurate steering feedback.
This measuring tool ensures that adjustments are not just approximate, but are made with the precision required by racing regulations and engineering principles. The CNC-machined housing guarantees that the measuring tool itself will not deform, ensuring the same accuracy with every use.
The use of the Billet Knob Camber Gauge is intuitive, but for maximum accuracy, follow the steps below:
Preparation: Ensure that the kart is standing on a horizontal, stable surface, and the suspension is unloaded (or loaded in the manner prescribed by the manufacturer).
Locking mechanism: Place the measuring device's mounting surface onto the side surface of the wheel (generally against the rim edge or an adapter designed for this purpose). Precise fitting is crucial.
Leveling: Using the level found on the measuring instrument, adjust the instrument so that the bubble rests exactly on the center mark. This ensures that the instrument's vertical axis is exactly perpendicular to the plane of measurement.
Camber Reading: A beépített skálán olvassa le a kerékdöntés mértékét. Mivel ez egy Csak Döntés mérő, a leolvasás közvetlenül a dőlésszöget adja meg.
Measurement on Both Sides: Repeat the process for the wheel on the other side and compare the values for optimal symmetry.
This Billet Knob Camber Gauge is the cornerstone for reliable and repeatable race tuning setups, an indispensable tool for every serious racer and mechanic.
